bvermeul is currently certified at Journeyer level.

Name: Bas Vermeulen
Member since: 2001-04-04 13:32:49
Last Login: 2012-02-14 22:50:11

FOAF RDF Share This

Homepage: http://www.xs4all.nl/~bvermeul/

Notes:

C, C++, Pascal programmer.

D&D addict (both player and DM)

Writing drivers for the No Wires Needed 802.11 pcmcia wireless cards.

Writing drivers for the 3Com 3CRWE62092A 11 Mbps Wireless LAN PC Cards.

Writing drivers for the Atmel AT76c503A USB to 802.11 Adapter.

Projects

Recent blog entries by bvermeul

Syndication: RSS 2.0
RHCE:

I passed the RHCE exam with a whopping 99.33% score. :)

  • Debug exam 100%
  • Multiple Choice 98%
  • Installation 100% I can live with those results... :)

    at76c503a:

    There may be a breakthrough in the permission part for the at76c503a chipset. We'll see what happens.

  • RHCE:

    I did a RH300 course and exam last week. It was easy enough, the troubleshooting part was a breeze (needed only 40 minutes for the 4 sessions, which included 3 re-installs for the various scenarios), the multiple-choice was easy enough, and I think I got the install part as well.

    I'll probably know within a couple of days if I passed. It was fun though, and the course at IBM was well given.

    poldhu_cs:

    Put my poldhu_cs sources in cvs on my laptop. I've been doing it all by hand (with a directory for each version). It's an improvement. :)

    poldhu_cs:

    Made suspend/resume work correctly with the card inserted. Basically, enable interrupts when needed, reset, and load the configuration again.

    I'm also working on 2.2 support. Shouldn't be too difficult, but I don't want to add #if's dependant on kernel releases. It can be done, since pcmcia-cs uses a good set of compatibility headers, and I think I've got a handle on the right define to check on...

    poldhu_cs:

    Rewrote the interrupt handling, send and receive procedures to be interrupt driven and state based. I've got it working now, with nice performance to boot. I'll be releasing a version 0.2.4 or maybe 0.3.0 version soon.

    at76c503a:

    I've just checked in a firmware upload utility for the at76c503a. It implements the USB Device Firmware Upgrade specification, with some extra proprietary stuff from Atmel. It works with an OHCI USB controller, but refuses to work on my newer laptop with an UHCI USB controller. I'm not sure WHY it fails, since a co-developer has it working on his laptop with an UHCI USB controller. The code is working (it works on the OHCI controller), but something in my UHCI controller or the linux usb driver or both isn't doing what it's supposed to.

    The code can be found in cvs (:pserver:cvs@cvs.blackstar.nl:/cvsroot, password cvs, atmel-fw repository), and if anyone has got any idea what may be causing this, I'd love to hear someone else's opinion.

    10 older entries...

     

    bvermeul certified others as follows:

    • bvermeul certified alan as Master
    • bvermeul certified jgarzik as Master
    • bvermeul certified davem as Master
    • bvermeul certified wichert as Master
    • bvermeul certified hpa as Master
    • bvermeul certified axboe as Master
    • bvermeul certified zab as Master
    • bvermeul certified cdegroot as Master
    • bvermeul certified puffin as Master
    • bvermeul certified gert as Master
    • bvermeul certified Fyodor as Master
    • bvermeul certified Telsa as Journeyer
    • bvermeul certified jkh as Master
    • bvermeul certified ajh as Journeyer
    • bvermeul certified johnsonm as Master
    • bvermeul certified sopwith as Master
    • bvermeul certified quintela as Journeyer
    • bvermeul certified jes as Master
    • bvermeul certified rms as Master
    • bvermeul certified riel as Master
    • bvermeul certified bvermeul as Apprentice
    • bvermeul certified Dionys as Apprentice
    • bvermeul certified Randakar as Apprentice
    • bvermeul certified tolonuga as Journeyer
    • bvermeul certified kroah as Journeyer
    • bvermeul certified dchapes as Apprentice
    • bvermeul certified splork as Journeyer

    Others have certified bvermeul as follows:

    • bvermeul certified bvermeul as Apprentice
    • Randakar certified bvermeul as Apprentice
    • lerdsuwa certified bvermeul as Journeyer
    • Dionys certified bvermeul as Master
    • tolonuga certified bvermeul as Journeyer
    • Ilan certified bvermeul as Journeyer
    • dmerrill certified bvermeul as Journeyer
    • hub certified bvermeul as Apprentice
    • splork certified bvermeul as Journeyer
    • dchapes certified bvermeul as Apprentice
    • riel certified bvermeul as Apprentice
    • fxn certified bvermeul as Journeyer

    [ Certification disabled because you're not logged in. ]

    New Advogato Features

    New HTML Parser: The long-awaited libxml2 based HTML parser code is live. It needs further work but already handles most markup better than the original parser.

    Keep up with the latest Advogato features by reading the Advogato status blog.

    If you're a C programmer with some spare time, take a look at the mod_virgule project page and help us with one of the tasks on the ToDo list!

    X
    Share this page